UDT Trener

IP

UDT tests: Mobile elevating work platforms (IP)

Category scope in Polish

Podesty ruchome przejezdne

239 questions in this category

Study questionsTake a test

Simulator: 15 questions, 30 minutes and at least 11 correct answers. This format is described by training centres; UDT does not publish it officially.

All questions in this category

  1. 1.Technical equipment subject to technical supervision may be operated on the basis of:#295
  2. 2.Which of the following activities are not part of a UTB operator's duties:#2
  3. 3.Maintenance inspection intervals for technical equipment:#3
  4. 4.Technical supervision is defined as:#4
  5. 5.Who carries out technical inspection of technical equipment?#5
  6. 6.A change to the technical parameters or design of technical equipment is treated as:#6
  7. 7.Who may carry out an agreed repair or modernisation of technical equipment?#7
  8. 8.The Technical Inspection Act specifies the following forms of technical inspection:#8
  9. 9.Who issues the decision authorising operation of technical equipment?#9
  10. 10.An operator of technical equipment may start work when:#10
  11. 11.An operator of technical equipment may start work when:#11
  12. 12.If the person or organisation responsible for operating the equipment fails to comply with technical inspection regulations, that person or organisation:#12
  13. 13.If a threat to human life or health, property and the environment is identified, the inspector:#13
  14. 14.In the event of dangerous damage to technical equipment or an accident, the person or organisation responsible for operating the equipment:#14
  15. 15.An operator qualification certificate may be revoked by:#15
  16. 16.Which of the following are not subject to technical supervision?#16
  17. 17.Technical equipment subject to technical supervision includes:#17
  18. 18.Dangerous damage to technical equipment means:#18
  19. 19.An accident means:#19
  20. 20.Who is responsible for ensuring proper operation and maintenance of technical equipment?#21
  21. 21.Maintenance inspections required by law are carried out by:#22
  22. 22.Who keeps the technical equipment's maintenance log?#23
  23. 23.Acceptance inspections of technical equipment are carried out:#24
  24. 24.Periodic technical examinations are carried out on technical equipment subject to:#25
  25. 25.The absence of the maintenance technician during a technical examination of equipment requires, as a minimum:#26
  26. 26.A candidate seeking to become an operator of technical equipment must:#27
  27. 27.The operator of technical equipment must stop work when:#28
  28. 28.Maintenance inspection intervals for equipment may be specified:#29
  29. 29.The intervals for periodic examinations and ad hoc control examinations of materials handling equipment (UTB) are specified:#30
  30. 30.The duties of an operator of technical equipment include:#31
  31. 31.Technical equipment may be operated on the basis of:#32
  32. 32.After carrying out activities concerning technical equipment, the inspector prepares:#33
  33. 33.Repairs and modernization of technical equipment are carried out by:#34
  34. 34.Who is directly responsible for the safe operation of technical equipment?#35
  35. 35.Where is information on the rules for safely operating the equipment provided?#36
  36. 36.As part of the checks before starting work, the operator:#37
  37. 37.Who issues qualification certificates for operating technical equipment subject to technical inspection?#38
  38. 38.Overloading a UTB during operation:#39
  39. 39.Ad hoc in-service inspections are carried out, among other cases:#40
  40. 40.The operator's duties are specified:#41
  41. 41.Who carries out periodic inspections of technical equipment?#42
  42. 42.Which is a technical inspection body?#43
  43. 43.Qualification certificates authorizing the operation of technical equipment are valid in:#44
  44. 44.The obligation for operators of technical equipment to use personal protective equipment arises from:#45
  45. 45.Under the Council of Ministers regulation on the types of technical equipment subject to technical supervision, technical supervision requirements apply to:#46
  46. 46.The operating instructions need not contain:#47
  47. 47.The equipment's inspection record book must contain:#48
  48. 48.A decision issued by UDT:#49
  49. 49.A person may take the qualification examination if they:#50
  50. 50.After a technical inspection with a positive result, the UDT inspector:#51
  51. 51.Qualification certificates:#52
  52. 52.A person who modifies technical equipment without agreement from the competent technical supervision authority:#53
  53. 53.Anyone who allows technical equipment to be operated without a valid decision authorising operation:#54
  54. 54.The operating instructions are:#55
  55. 55.Operator qualification certificates are not required:#56
  56. 56.A person holding qualification certificates may operate:#57
  57. 57.The operator of technical equipment must:#58
  58. 58.Qualification certificates for operating technical equipment are:#59
  59. 59.An operator who witnesses an accident must:#60
  60. 60.The forms of technical supervision are:#62
  61. 61.Qualification certificates for operating technical equipment subject to technical supervision are issued by:#67
  62. 62.The examination board informs the candidate of the examination result:#68
  63. 63.The maintenance log should be kept:#69
  64. 64.Job-specific safety instructions:#70
  65. 65.After the qualification certificate for operating the equipment expires, the operator:#71
  66. 66.The validity of a qualification certificate is extended:#72
  67. 67.The lifting capacity of UTB is an equipment parameter directly related to:#73
  68. 68.Information about the equipment's lifting capacity may be provided:#78
  69. 69.The correct unit of lifting capacity is:#79
  70. 70.The reach of an elevating work platform is:#296
  71. 71.Which is not part of an elevating work platform's working envelope chart?#297
  72. 72.Unless the manufacturer specifies otherwise, maintenance inspections of mobile elevating work platforms must be carried out at least:#298
  73. 73.Periodic examinations of mobile elevating work platforms are carried out:#299
  74. 74.An operator of an elevating work platform controlled from the work platform may be a person who:#300
  75. 75.For elevating work platforms permitted to carry more than 2 people on the work platform, an operator qualification certificate must be held by:#301
  76. 76.Using the illustration, determine the maximum load capacity of the elevating work platform:#302
  77. 77.Based on the diagram, determine the maximum number of people who may be on the work platform:#303
  78. 78.Based on the diagram, identify the correct operating parameters of the mobile elevating work platform:#304
  79. 79.The diagram indicates:#305
  80. 80.The diagram indicates:#306
  81. 81.The diagram indicates:#307
  82. 82.An illuminated warning light next to the graphic symbol shown, found on some mobile elevating work platforms, indicates:#308
  83. 83.A mobile elevating work platform bearing the marking shown is:#309
  84. 84.The illustration specifies:#310
  85. 85.Selecting position A in the illustration means:#311
  86. 86.The scissor lift's travel mechanism is activated by moving the control lever after first pressing the button marked with the letter:#312
  87. 87.The scissor lift's lifting mechanism is activated by moving the control lever after first pressing the button marked with the letter:#313
  88. 88.Which of the marked pictograms indicates the mobile elevating work platform's wheel steering function?#314
  89. 89.The maximum rated load of the mobile elevating work platform shown is:#315
  90. 90.The illustration shows:#316
  91. 91.Moving the control lever in direction A activates:#317
  92. 92.Moving the control lever in direction B activates:#318
  93. 93.Pressing the buttons marked C on the control lever activates:#319
  94. 94.The symbol shown identifies:#320
  95. 95.Which labelled component in the drawing is the mechanical safety device that protects the scissor lift against the consequences of wheel damage while travelling with the platform raised?#321
  96. 96.The mechanical safety devices that protect a scissor lift against the consequences of wheel damage while travelling with the platform raised are:#322
  97. 97.The batteries of electric mobile elevating work platforms:#323
  98. 98.The parameters specified by the manufacturer on the battery nameplate are:#324
  99. 99.The emergency STOP switch:#325
  100. 100.The emergency STOP switch:#326
  101. 101.The emergency STOP switch:#327
  102. 102.One way to protect the lift against accidental operation of its control levers is:#328
  103. 103.The travel speed of a low-speed self-propelled mobile elevating work platform:#329
  104. 104.The travel speed of a low-speed self-propelled elevating work platform is affected by:#330
  105. 105.The outriggers of mobile elevating work platforms are intended to:#331
  106. 106.The slewing column of a mobile elevating work platform:#332
  107. 107.What is the difference between outreach and a boom?#333
  108. 108.Outreach can be changed by:#334
  109. 109.The telescopic boom of a mobile elevating work platform:#335
  110. 110.A pilot-operated check valve (hydraulic lock) in a mobile elevating work platform's hydraulic system protects against:#336
  111. 111.Which protective valve is fitted in the outrigger hydraulic system?#337
  112. 112.Check valves (hydraulic locks) are installed in the circuits of:#338
  113. 113.The component that generates pressure in a mobile elevating work platform's hydraulic system is:#339
  114. 114.A pressure relief valve installed in a mobile elevating work platform's hydraulic system:#340
  115. 115.Hydraulic safety components include:#341
  116. 116.The safety valve in a hydraulic system protects:#342
  117. 117.Hydraulic locks installed in the hydraulic systems of elevating work platforms:#343
  118. 118.A hydraulic directional control valve is installed in a system to:#344
  119. 119.An actuator in the hydraulic system of an elevating work platform is:#345
  120. 120.The component that protects a hydraulic system against excessive pressure is:#346
  121. 121.Control of the directional control valve in an elevating work platform's hydraulic system can be:#347
  122. 122.When pressure rises excessively, the pressure relief valve in an elevating work platform's hydraulic system directs oil:#348
  123. 123.Where are pilot-operated check valves, also known as hydraulic locks, installed?#349
  124. 124.The criteria and conditions for correctly performing hydraulic system tests are specified by:#350
  125. 125.The density of hydraulic oil at a temperature below 0°C:#132
  126. 126.What is a "tipping line"?#351
  127. 127.The permissible wind speed when operating a mobile elevating work platform is:#352
  128. 128.Mobile elevating work platforms are intended for:#353
  129. 129.Mechanical safety devices found on mobile elevating work platforms include:#354
  130. 130.Electrical safety devices found on mobile elevating work platforms include:#355
  131. 131.The outrigger setup may be adjusted:#356
  132. 132.Emergency lowering on self-propelled scissor lifts is most commonly performed:#357
  133. 133.The sensor detecting that the boom of a vehicle-mounted platform is stowed in its transport position prevents:#358
  134. 134.The contacts confirming that the outriggers of a mobile elevating work platform are correctly lowered:#359
  135. 135.Tools and components on the work platform:#360
  136. 136.Which items may be on the work platform?#361
  137. 137.Which activity is particularly dangerous when working at maximum height?#362
  138. 138.Which activity is particularly dangerous when working at maximum outreach?#363
  139. 139.The safe distance for setting up a mobile elevating work platform from the edge of an excavation depends on:#364
  140. 140.The safe distance for setting up a mobile elevating work platform from the edge of an excavation depends on:#365
  141. 141.Setting up a mobile elevating work platform near the edge of an excavation:#366
  142. 142.Based on the drawing, identify the correct measurement of the safe distance between the mobile elevating work platform and the excavation edge:#367
  143. 143.The safe working distance between a mobile elevating work platform and a power line:#368
  144. 144.The safe distance between a mobile elevating work platform and the outermost conductors of power lines with a rated voltage from 1 to 15 kV is:#369
  145. 145.The safe distance between a mobile elevating work platform and the outermost conductors of power lines with a rated voltage from 30 to 110 kV is:#370
  146. 146.The safe distance between a mobile elevating work platform and the outermost conductors of a power line with a nominal voltage from 15 to 30 kV is:#371
  147. 147.Based on the illustration, identify the correct measurement of the minimum distance from power lines:#372
  148. 148.Operating a mobile elevating work platform near a power line at less than the permitted distance is:#373
  149. 149.Entering or leaving the work platform is possible:#374
  150. 150.Based on the diagram, identify the correct specifications of the mobile elevating work platform:#375
  151. 151.Based on the diagram, identify the correct specifications of the mobile elevating work platform:#376
  152. 152.Ensuring the correct electrolyte level in the batteries of electric mobile elevating work platforms is the responsibility of:#377
  153. 153.As part of daily servicing and assessment of the batteries in electric mobile elevating work platforms, the operator checks:#378
  154. 154.After noticing during travel that the engine oil pressure warning light is on, the operator should:#379
  155. 155.An illuminated or flashing service indicator light means that:#380
  156. 156.Properly functioning control levers:#381
  157. 157.For mobile elevating work platforms equipped with two or more control stations:#382
  158. 158.During daily servicing, the operator checks whether:#383
  159. 159.When the outriggers of a scissor lift are deployed, a properly functioning safety system should:#384
  160. 160.A safe check of the pressure relief valve on a mobile elevating work platform is performed:#385
  161. 161.Unless otherwise specified by the manufacturer, the maximum permissible downward drift of the work platform is:#386
  162. 162.When the slewing mechanism operates, the stability of the mobile elevating work platform:#387
  163. 163.Dangerous movements of a boom lift that are disabled in the event of overload include:#388
  164. 164.When assessing the technical condition of the lift's control panel, the operator checks, among other things:#389
  165. 165.An external oil leak in the lift's hydraulic system makes the machine unfit for safe operation when:#390
  166. 166.Leakage in the hydraulic system of mobile elevating work platforms may manifest itself as:#391
  167. 167.When assessing the technical condition of a mobile elevating work platform before starting work, the operator:#392
  168. 168.When assessing the technical condition of a mobile elevating work platform before starting work, the operator:#393
  169. 169.When assessing the technical condition of the hydraulic system, the operator:#394
  170. 170.Jerky movement of the lifting mechanism may be caused by:#395
  171. 171.The operator checks the oil level in the hydraulic system:#396
  172. 172.Unless the manufacturer specifies otherwise, the maximum permissible outrigger retraction during a leak-tightness test is:#397
  173. 173.When rescuing a person trapped on the work platform, you must:#398
  174. 174.Increasing the working height of a scissor lift by the operator:#399
  175. 175.Placing pads beneath the machine's outriggers:#400
  176. 176.Before setting up the mobile elevating work platform at a new work location, the operator should:#401
  177. 177.Unless otherwise specified by the manufacturer, hydraulic lock valves on platforms with direct control should be tested as follows:#402
  178. 178.Hydraulic lock valves on platforms with indirect control are tested:#403
  179. 179.Using the working envelope diagram shown, identify the correct operating parameters of the platform:#404
  180. 180.Using the working envelope diagram shown, identify the correct operating parameters of the platform:#405
  181. 181.Using the working envelope diagram shown, identify the correct operating parameters of the platform:#406
  182. 182.Using the working envelope diagram shown, determine the maximum permissible load on the work platform raised to a height of 15 m at an outreach of 11 m:#407
  183. 183.Using the working envelope diagram shown, determine the maximum permissible load on the work platform raised to a height of 15 m at an outreach of 7 m:#408
  184. 184.Using the working envelope diagram shown, determine the maximum permissible load on the work platform raised to a height of 22 m at an outreach of 4 m:#409
  185. 185.Using the work envelope chart shown, determine the maximum permissible load on the work platform raised to a height of 22 m at an outreach of 9 m:#410
  186. 186.Using the work envelope chart shown, identify the maximum outreach of the work platform carrying a load of 200 kg:#411
  187. 187.Using the work envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#412
  188. 188.Using the work envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#413
  189. 189.Using the work envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#414
  190. 190.Using the work envelope chart shown, determine the maximum permissible load on the work platform raised to a height of 17 m at an outreach of 11 m:#415
  191. 191.Using the working envelope chart shown, determine the maximum permissible load on the work platform at a height of 18 m and a horizontal outreach of 8 m:#416
  192. 192.Using the working envelope chart shown, determine the maximum permissible load on the work platform at a height of 22 m and a horizontal outreach of 4 m:#417
  193. 193.Using the working envelope chart shown, determine the maximum permissible load on the work platform at a height of 26 m and a horizontal outreach of 7 m:#418
  194. 194.Using the working envelope chart shown, identify the maximum horizontal outreach of the work platform carrying a load of 200 kg at a height of 22 m:#419
  195. 195.Using the working envelope chart shown, identify the maximum horizontal outreach of the work platform carrying a load of 230 kg at a height of 17 m:#420
  196. 196.Using the working envelope chart shown, identify the maximum horizontal outreach of the work platform carrying a load of 100 kg at a height of 14 m:#421
  197. 197.Based on the work envelope chart shown, identify the maximum outreach of the work platform carrying 100 kg at a height of 18 m:#422
  198. 198.Based on the work envelope chart shown, identify the correct operating parameters of the lift:#423
  199. 199.Based on the work envelope chart shown, identify the correct operating parameters of the lift:#424
  200. 200.Based on the work envelope chart shown, identify the correct operating parameters of the lift:#425
  201. 201.Based on the work envelope chart shown, determine the maximum permissible load on the work platform raised to a height of 21 m at an outreach of 11 m:#426
  202. 202.Based on the work envelope chart shown, determine the maximum permissible load on the work platform raised to a height of 18 m at an outreach of 8 m:#427
  203. 203.Using the working envelope chart shown, determine the maximum permissible load on the working platform raised to a height of 20 m at a horizontal outreach of 10 m:#428
  204. 204.Using the working envelope chart shown, determine the maximum permissible load on the working platform raised to a height of 19 m at a horizontal outreach of 11 m:#429
  205. 205.Using the working envelope chart shown, identify the maximum horizontal outreach of the working platform carrying a load of 215 kg and raised to a height of 22 m:#430
  206. 206.Using the working envelope chart shown, identify the maximum horizontal outreach of the working platform carrying a load of 215 kg and raised to a height of 17 m:#431
  207. 207.Using the working envelope chart shown, identify the maximum horizontal outreach of the working platform carrying a load of 115 kg and raised to a height of 14 m:#432
  208. 208.Using the working envelope chart shown, identify the maximum horizontal outreach of the working platform carrying a load of 80 kg and raised to a height of 18 m:#433
  209. 209.Based on the working envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#434
  210. 210.Based on the working envelope chart shown, determine the maximum permissible load on the work platform raised to a height of 16 m at an outreach of 8 m:#435
  211. 211.Based on the working envelope chart shown, determine the maximum permissible load on the work platform raised to a height of 15 m at an outreach of 10 m:#436
  212. 212.Based on the working envelope chart shown, identify the maximum outreach of the work platform carrying a load of 200 kg:#437
  213. 213.Based on the working envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#438
  214. 214.Based on the working envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#439
  215. 215.Using the working envelope diagram shown, determine the maximum permissible load on the work platform raised to a height of 12 m at an outreach of 4 m:#440
  216. 216.Using the working envelope diagram shown, determine the maximum permissible load on the work platform raised to a height of 8 m at an outreach of 6 m:#441
  217. 217.Using the working envelope diagram shown, identify the maximum outreach of the work platform carrying a 200 kg load:#442
  218. 218.Using the working envelope diagram shown, identify the maximum outreach of the work platform carrying an 80 kg load:#443
  219. 219.Using the working envelope diagram shown, identify the maximum outreach of the work platform carrying a 240 kg load:#444
  220. 220.Using the working envelope diagram shown, identify the correct operating parameters of the mobile elevating work platform:#445
  221. 221.Based on the work envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#446
  222. 222.Based on the work envelope chart shown, identify the correct operating parameters of the mobile elevating work platform:#447
  223. 223.Using the working envelope chart shown, identify the correct operating specifications of the mobile elevating work platform:#448
  224. 224.Based on the work envelope chart shown, determine the maximum permitted load on the work platform raised to a height of 23 m at an outreach of 6 m:#449
  225. 225.Based on the work envelope chart shown, determine the maximum permitted load on the work platform raised to a height of 22 m at an outreach of 9 m:#450
  226. 226.Based on the working envelope diagram, determine the maximum permitted number of people who can be raised to a height of 24 m:#451
  227. 227.Using the working envelope chart shown, determine the maximum permitted number of people who can be raised to a height of 18 m at an outreach of 10 m.#452
  228. 228.Using the working envelope chart shown, identify the maximum outreach of the working platform carrying a load of 200 kg.#453
  229. 229.Using the working envelope chart shown, identify the correct operating parameters of the elevating work platform.#454
  230. 230.Using the working envelope chart shown, identify the correct operating parameters of the elevating work platform.#455
  231. 231.Using the working envelope chart shown, determine the maximum permitted load on the working platform on the vehicle's left side, 6 m from the axis of rotation.#456
  232. 232.Using the working envelope chart shown, determine the maximum permitted load on the working platform on the vehicle's left side, 8 m from the axis of rotation.#457
  233. 233.Using the working envelope chart shown, determine the maximum permissible outreach of the aerial work platform with a load of 200 kg.#458
  234. 234.Using the working envelope chart shown, determine the maximum permissible outreach of the aerial work platform with a load of 120 kg.#459
  235. 235.Using the working envelope chart shown, determine the maximum permissible outreach of the aerial work platform with a load of 80 kg.#460
  236. 236.Using the working envelope chart shown, identify the correct operating parameters of the aerial work platform:#461
  237. 237.Using the working envelope chart shown, identify the correct operating parameters of the aerial work platform:#462
  238. 238.Using the working envelope chart shown, identify which raised platform position is impossible:#463
  239. 239.Using the working envelope chart shown, identify the correct operating specifications of the mobile elevating work platform:#464

Questions and answers

How many questions are in this category?

Mobile elevating work platforms: 239 questions in this category. Sample questions published by UDT, with our answer key, translations and explanations.

Can I study for free?

The first 30 questions in learning mode and 1 test per day are free. Individual question pages are also free to read.

How does the practice exam work?

Simulator: 15 questions, 30 minutes and at least 11 correct answers. This format is described by training centres; UDT does not publish it officially.

All categories